The shaft

A quick little update.
The interior has got a gorgeous coat of white paint on it.
Today we drilled out the 2 1/2" shaft holes and installed the stern tubes.
Tomorrow we pick up our newly galvanized engine beds, chain plates, dead eye bands and the chain plates for the bowsprit. Then....install.

Soles and such

Oh, we've had a great and busy few weeks. Let's see. ... we framed up the cabin sole. The sole will go in soon. There will be a 2 foot row of access hatches up through the center to allow for maintenance and bilge access. I took a couple of (not serious) tumbles on the very steep side of the vessel but it didn't hold me up. My arm got a bruise and my pride took a little beating but with a little good humor both seem to have recuperated pretty well.

Next we raised the sides of the main cabin. So below we will have about 7 feet of head room. Yeah for anyone tall who comes sailing with us- they won't bang their head. Ha.
Last week we started to sand and varnish the underside and side of the douglas fir deck beams. And one day we got a visit from Gary Stowell from Sherwin Williams paint and he blessed us with white paint for the interior and varnish to help finish the beams. If you ever need paints and supplies , Gary and his team in Dartmouth are great to work with and knowledgeable to boot.  We have 2 coats of varnish on so far and hope to get the third coat on next week sometime.

On Friday we got a call from Willie at Hubtown Crane wondering  if we wanted the  engines set in. Yes! So we spent the afternoon working with him to get each engine down through the hole in the roof of the shop  and then set on the engine beds in the bilge of the boat.  There were a couple of tricky  places but they are in there and we have spent the last couple of days tweaking the engine beds before they go for galvanizing.

We drilled pilot holes for the shafts (propeller)through the hull 4 years ago and amazingly everything lined up very well. We are extremely pleased with the fit.
While the beds are out of the vessel being galvanized we will enlarge the pilot holes to the full 2 3/8" to accept the shafts and stern tubes. It's all very exciting to see it coming together.
On top of all that we have had a few visitors here and there. We're always happy to share the building of this vessel with those who are interested.

More deck work

 The cabin corners are all in. Little bits by little bits, it all gets done. We are sanding and cleaning the interior before we paint. The beams will be varnished inside as well. So excited to see it painted.

We had to add a veranda on the front of the boat shed to work at the bow. A great place to look at the whole inside of the vessel. I'm thinking she may grow with the planking- so maybe 77 foot by the time she's ready for the water. Who knew?

Antique Tool Association

This week has been a busy week for both caulking- yes, the gift that keeps on giving, and for visitors. It's easy to tell that spring has sprung. People are starting to get out and about on day trips and such.
This is the weekend that we get our (now) annual visit from the Antique Tool Association.  We had a wonderful visit with old friends and met some new people from different parts of the Maritime provinces. If you are a collector of tools (woodworking or otherwise) give these folks a call. They are a great bunch, full of enthusiasm, knowledge, and a practical joke or two.
This year they surprised Warren with a family flag for our vessel.  I'm proud to say I kept a secret for almost a whole year and there were times the emails were a flying to get the right emblem. Much thanks to Art Keeble and everyone else in the association  and to Carole Aylard at the Flag Shop for all of the beautiful work. We absolutely love the flag and we enjoyed the visit with everyone yesterday.

4H Clifton

We had a lovely visit today from the Clifton 4H group. We had leaders and parents come with 4H kids and kids not even old enough to be in 4H. Ages probably from less than 2 to around 14. It was nice to be able to share our work with them and answer their questions but it was also fascinating to find out about the projects that they are working on. One young man turns bowls and has several in a competition right now. I saw a picture and I am in awe of his talent, whatever the age. That bowl was beautiful!  Another young man is working on a 3D cutting board, which he promised to bring over for us to see. We are looking forward to that. One young lady told me she wasn't interested in woodworking but I found out that she is very involved in the animal side of 4H and didn't mind throwing around bales of hay. That's pretty awesome in my books too. We all take on different hobbies- it's what keeps everything interesting.

Before they left (amid promises to come back and visit) they presented us with 2 beautiful presents handmade by 2 of the leaders. David and Beau, I want to thank each of you and the whole group for the pieces of usable art. One gift is a knife holder for your wall, it is made of end grain black locust and it is truly lovely. It will have a place of honour on my wall. The other gift is a set of 2 hand turned pens that are almost to gorgeous to use. These, too, will be treasured.

Thank you for coming to visit. We hope you come back to see us again.

Cotton, oakum, seal it!

Well, it's been a busy month for sure. We started off at the beginning if the month rolling cotton in the seams of the vessel and using the irons and mallet to pound them in solid. If you saw the video on Schooner Lena Blanche facebook page ,you will see what I'm talking about. That was the first couple of weeks and 16 lbs of cotton later, she was all cotton caulked (corked, some call it. I had an older shipwright ,I believe he was in his late 80s or early 90s , correct my pronunciation. He had spent a lifetime building and caulking  (corking) boats- who am I to argue.)

Next we started on the oakum. A totally different kettle of fish,  as it were. Thankfully,  we have quite a bit of it pre-rolled. Each strand of oakum has to be bunched up and pounded into the seam until it fills the seam and then it's pounded to get all the little bits in. It's time consuming and your back hurts a little but , surprisingly,  it's very satisfying and when it's done you can look at it and take pride in a job well done.  AND, when the boat doesn't leak- you'll know you did a good job.  Haha.

As we caulk we are also sealing the seams with a marine sealant. This gives a finished look and keeps the water out.

Warren pounding in oakum

Two strands of oakum for a wider seam

Marine sealant after the oakum has been put in the seams. 

We'll keep at the caulking for the next few weeks until the vessel is all finished. It's  coming along great.

New stuff going on

So, there's all kinds of stuff going on these days, as you will see from the photos.  This is me clinging to the sealing of the vessel plugging all of the thousands of spike holes (that the sealing is held on with). After they are all plugged, we will cut them off and sand them and then paint the vessel's interior. Whew! It will be great to see it painted and looking awesome.

 These are dummy shafts. They represent where the shafts will attach to the transmissions for the engines. We have put them here so that we can fit the engines properly before we get the engine beds galvanized.  It would be terrible to have to adjust it (cut it up) after the fact.

 This is the pattern for a hawse hole (basically) for tie up ropes. We will cast probably 6 or 7 sets of these in all. The pattern is made out of pine.

 These beauties are belaying pins.  Great for tying off rope. Or ,you know, keeping order. Just kidding. Wouldn't want to get a knock with these things. There are white oak ones and angelique ones in the bucket. Can't wait to see them on the rails.

And finally, although  not finally because there's another work in progress but I want to show the finished piece in the next blog post, we finally added grab rails to the dog house (scuttle, deck house) so now when we're heeled down we have something to hang on to. Definitely don't want to end up in the drink.
We've had lots of visitors lately and I got a lovely card of encouragement today from B and H Webber in Jeddore. Thank you so much for thinking of us and for being with us on this crazy ride. We hope to see you again soon.
Til next time.....